Resetting empty warning with Epson 1430


#1

I have not used my Epson Artisan 1430 for several months and today removed the cartridges containing Peezo Flush. After shaking the ink filled cartridges I inserted them and got the message that #3 (LC) was low in ink. Since it was about 2/3 full I reinserted it, got no change and then filled it up. After reinserting it I got a similar message for inks #1,4,5,6 and again topped them off. However, now the low ink warnings remain and I am unable to go any further. Got any suggestions?
Thanks,
Joel


#2

Use a chip resetter. Otherwise you have to wait for the printer to auto-reset the chip when it is low enough (the chip, not the actual ink level, it doesn’t know the actual ink level), then remove, refill and reinsert the cartridge. The chip resetter makes it really easy to refill and reset the chip at the same time.


#3

thanks. Sounds easy enough
Joel