R 3000 Waste ink Bottle Installation

Hi I have removed the back and side to expose the ink drain lines. The printer ink lines are about the same size as the line supplied with the ink bottle. Should there be an adaptor to connect the existing and the new lines? The instruction supplied are for the R2400

Thanks Jim Herrington

Hi Jim~

The instillation procedure is essentially the same with the R2400 and R3000, but you can see some R3000 waste bottle instillation photos here: http://www.inkjetmall.com/wordpress/new-products/the-r3000-cometh/

I hope this helps, best regards~ Dana :slight_smile: