Printing from cs6


#1

when printing from cs6 with a mac 10.8- select k7 printer,ps manages color,wide gamut rgb,relative colorimetric,black pt. on. in print settings-qtrrip,curve 1 paper profile,2880dpi,unidirectional and print. is this the correct procedure?


#2

When printing Piezography with a Mac using 10.6.8 or higher, we recommend using the QTR Print Tool, as described in our blog post here: http://www.piezography.com/PiezoPress/blog/piezography-technical/qtr-prin-tool/
You can also learn about our recommended workflows, as well as a LOT of other helpful information about Piezography printing in our new manual, which you can find here: http://www.piezography.com/PiezoPress/blog/piezography-technical/the-new-piezography-manual/

Please let me know if you have questions after reading this information, or if there’s anything else I can help you with.
Best regards and happy printing~ Dana :slight_smile:


#3

thanks for the info.used the qtr print tool to make a print. but the print is stop to stop and a half darker then what is seen on monitor. any idea why?


#4

Please see this thread for additional information: http://www.inkjetmall.com/tech/showthread.php?224-dark-prints