Print Viewing Lights

Hello

I’m looking for recommendations for a print viewing lamp and fixture.

Thank you,

John Powers

Hi John,

Did you find anything suitable? I’m in the market for something to fill this need also.

Cheers
Chris

Hello

I eventually purchased a couple of 95 CRI/5000K (D50) bulbs from Waveform Lighting to use in adjustable swing arm light fixtures. I was previously using Solux/Tailored Lighting products but they are no longer in business.

My viewing table is about 5 feet long by 3 feet deep and I clamped a fixture to each end of the table and adjusted them so they are about 3 to 3.5 feet from the prints.

If you come up with a better solution let me know.

Thanks,

John

Thanks John, that’s really helpful. I’ll see what else I can come up with and let you know if I succeed.

Cheers,
Chris.