Post Flush Procedure - Epson SP3800

I am currently and patiently treating a clogged print head (various channels) on a well used Epson SP3800 with PiezoFhush loaded into all 9 cartidges. I have run multiple Power Clean cycles, as instructed and it is now resting. After a positive nozzle check, what procedure should I follow when I re-install the cartridges filled with ConeColor Pro K3 ink?

Thank you for your help.

You will want to flush the individual channels back to Cone Color using the instructions found here:


Thank you, Walker. I am not currently using the software your reference in the link. Could I use the Adjustment Wizard (Adjustment/Service Program from 2manuals) and run an Initial Ink Charge?

You can do that too. :slight_smile:


Thank you, Walter