P2 Selenium curves Epson 7880

piezography
inks

#1

Dana:

New dampers and inks/cartridges have arrived. About to change old dampers
and install P2 Selenium tone. Did I understand you correctly when you
suggested pulling flush through the disconnected lines when changing the
dampers…from a flush cartridge with the fill hole open?

Also, I have P 2 Special Edition curves 7880…but from this it seems I
should have P 2 Selenium curves now. From the discussion of P 2…" We
have completed a library of about 10 paper curves for each of the five
Piezography ink tones, because although the ink tones share similar shade
density, they are not all EXACTLY the same, so perfectionists as we are-
we decided to provide curves for each ink tone for the absolute best
output quality. " I could not find these in any of the usual places.

Hope you are enjoying the late fall interlude of warm weather…looking
forward to the completion and availability of Pro series.

Thanks for your help at the workshop.

John


#2

[QUOTE=john;9522]Also, I have P 2 Special Edition curves 7880…but from this it seems I should have P 2 Selenium curves now. From the discussion of P 2…" We
have completed a library of about 10 paper curves for each of the five Piezography ink tones, because although the ink tones share similar shade density, they are not all EXACTLY the same, so perfectionists as we are - we decided to provide curves for each ink tone for the absolute best output quality. " I could not find these in any of the usual places[/QUOTE]

This page has a link at the end, just above the comments box, to a zip that contains all the ten curves for each of the five inksets:

The link is: http://www.inkjetmall.com/tech/attachment.php?attachmentid=609&d=1421096170


#3

Found it…thanks…

John