Gloss optimiser with an Epson R3000

[Marc]

Two questions here – firstly my gloss optimiser is printing out the pink hue. I imagine that this is because of the piezoflush which has still to work its way through the system. I suppose the only way to flush it out of a single position is to print LLK images??

Secondly, the gloss optimiser prints onto the borders – in other words far more than is necessary for the image. Apart from being a waste of gloss optimiser, it also means that the border is unnecessarily tinted pink while the piezoflush is being flushed from the system.
Is there any way to get the gloss optimiser to print simply over the image area and not onto the borders?

Thanks very much

[IJM_TechSupport]

Check this thread. It should offer you the answer.

Gloss Optimizer coverage a little odd

Pro ink prints throughout the white area of the print by default. If you want to only gloss the print part use the NWGCO curves (inside of the NWGCO folder inside of your curve folder: drag the curves to the main curve folder and hit the install command). When you print with a NWGCO curve add a photoshop curve that brings your whites down by 1 point (so anything that is level 255 goes to level 254). This will ensure full gloss optimization of the printed image and zero gloss optimization of the…

best,
Walker