From 3880 to P800


#1

Hallo, I am changing my 3880 to the SC-P800. I use the Pro inks. In the experience of all here who have made the transition, what changes should I expect and therefore need to accommodate for when preparing to print. Specifically, if I use the same settings that I used when printing with the 3880, with the appropriate P800 curve, will I get the same print?


#2

You will need to change the resolution from 2880 to 2880 Super (on the P800). You may get the same print but 3880s are old printers at this point so a difference in linearity from your older printer to the new may exist. Most likely you’re good though.

best,
Walker