Because the PK/MK channel in my 9800 is terminally clogged I have converted it to a GO printer only. I have installed a new cartridge with GO in slot LLK and PiezoFlush in all other channels. Using QRTGui I have selected print model Quad9800-K7 and curve 3500GO_distributed_x800. When I test print I get full page of PiezoFlush.
Please advise what is wrong.
Please zip and attach the .quad file that you are printing with.
best regards,
Walker
Walker,
See attached.
Same file I have used on converted 3880 K7 Selenium LLK position without a 8_25x10_75 Landscape GO White.zip (30.1 KB) problem.
Walker,
Quad9800-P2 seems to work with GO-30000 curve1.
Yes, you need GO-30000 (and only that) as your curve and it will work.
best,
Walker
Copy. Thanks.
Also, Do you know a way to work around the top margin limit of 15mm using cut sheet paper on the 9800? Roll paper top/bottom left/right margins can be set to 3mm but apparently not for sheets.
tape a back leader to the sheet and set the sheet height to that total amount.
best,
Walker