Epson 3880 line purge

[johnlist1962]

I’m currently using the older matte black ink. I’m upgrading to the UltraHD Matte Black to use with the Selenium K7 ink set. What do I do to clean out the old ink from the line. I believe I can just purge the one line. How many pieces of 8.5x 11 will be waste in the purging of the ink.

Thanks
John

[walkerblackwell]

Right here:

How To Flush Individual Channel using QTR Calibration Mode

(These instructions are provided for changing out inks. Flushing is often used to change inks. This is not the recommended procedure for trying to unclog a printer. To unclog a printer - you need to run a procedure that provides suction rather than isolated printing of the channel. Please refer here for flushing a printer to unclog it.) To print from one specific ink channel (which is helpful when flushing just one line, without wasting ink in the other positions by doing power clean cycles), y…

best,
Walker

[johnlist1962]

Walker,

Since I do not see an MK specific QTR flush image, which one do I use to flush the MK channel.

Thanks

John

[walkerblackwell]

Just make sure your printer is set to MK and then use the “K” image.

best,
Walker