ALERT! **** Unable to create curve folder /Library/Printers/QTR/quadtone/Quad9880-PiezoDNP2 ****

InkjetMall Customer Support Piezography Inks & Printing
1

I just started working with the Piezography Pro module with P2 set up, and looking to print both positives and negatives. I had no issue installing the Quad9880-P2 printer but I am getting the above error when trying to install it for the DN.

If I am not mistaken, Piezo Pro with P2 setup uses the folder “4880-7880-9880-P2” for inkjet, and “4880-7880-9880-PiezoDN-P2” for digital negatives? or should I use the folder “4880-7880-9880-PiezoDN”, which I am already using with the PiezoDN module?

The Quad9880-PiezoDNP2 is the only one which would not install. Below is the full message.

Many thanks!

Gilles

Last login: Wed Aug 7 09:29:22 on ttys000
GILLESs-MacBook-Pro:~ gilleslorin$ /Applications/Piezography/Curves/4880-7880-9880-PiezoDN-P2/Install9880-PiezoDNP2.command ; exit;

ALERT! **** Unable to create curve folder /Library/Printers/QTR/quadtone/Quad9880-PiezoDNP2 ****

logout
Saving session…
…copying shared history…
…saving history…truncating history files…
…completed.

[Process completed]

2

Re-install quadtonerip and run it again.

If still not working do this command from terminal and then run it.

sudo chmod -R 777 /Library/Printers/QTR/quadtone/

best,
Walker

1 Like
3

You saved the day once again Walker, thanks! If I am not mistaken, I can use the .quad from PiezoDN with PiezoDN-P2, right?

1 Like
4

Yes, correct,

best,
Walker

5

Thanks again Walker!