Air in line. What utility to remove?

InkjetMall Customer Support Printer Maintenance & Cartridges
1

My VLM chip did not indicate low ink and as a consequence, it ran dry. You have provided me with a replacement chip but I need to get the air out of the line. What utility should I use to accomplish this? WIC has an ajustment program and the resetter but it is not clear as to which one would work. I don’t need to reset at this time. Advice would be appreciated.

2

The WIC utility should enable you to do an initial charge with this printer. If not you would need to buy the maintenance program from 2manuals.

Regards,
Walker