Additional P2 curves

qtr
curves
piezography

#1

Hi Greetings from across the pond,

In the Black Friday sale I bought sets of WT / Neutral & Selenium P2 inks for my 2880 printers and I was wondering if you have P2 curves available for the following papers, which are not in the P2 curve download.

[U]Matt papers[/U]

Hanhemuhle Bamboo

Canson Edition Etching Rag

Epson Cold Press Bright
Cold Press Natural
Hot Press Bright
Hot Press Natural
Kozo

Harman Matt FB MP

[U]Glossy papers[/U]

Canson Platine Fibre Rag

Harman Gloss Art Fibre Warmtone

Innova Fibaprint Warm Cotton Glossy IFA-45
Fibraprint Baryta IFA-69

Permajet Fibre Based Distinction

Fotospeed Platinum Gloss
Platinum Gloss Warm tone

Hanhemuhle Photo Glossy RC

Kind Regards,

Andy


#2

We only have a limited number of pre-made P2 curves (which are available for download on the P2 support article), though I have made a few custom P2 curves for some customers, and have some of the curves you’re looking for, which I have attached for you to try.

I suggest trying a P2 curve for a similar paper on the other papers you use (for example, the EPhotPressNat curve may give good results on the Hot Press Bright White paper), to see if the results are acceptable. If you’re not pleased with the results, I recommend getting custom P2 curves made for your other papers, which will optimize your output for your specific printer/ink/paper setup.

P2-4800-NU-CANplatFibRag.quad.zip (2.56 KB)P2-4800-NU-HANbamboo.quad.zip (2.5 KB)P2-x880-NU-EPhotPressNat.quad.zip (2.6 KB)

Best regards and happy printing~ Dana :slight_smile: