3800 Remapping the K channel

[johnlist1962]

I have a 3800 and the K Channel has a clog that I have been unable to remove fully. I’m using Selenium K7 inks. The damper is bad so I’m only printing matte. Can I remap the K channel to the LLK channel that is used for the GO.

Thanks

[walkerblackwell]

you can,

How to Re-Map a Piezography Curve

Here’s a quick article on remapping a Piezography curve. Remapping is used when one or more channels on a printer have died. Because Piezography does not normally require every available channel on your printer you can place a Piezo ink in a normally un-used channel and then remap the curves to use that channel instead of the bad channel. For example. If you have a 7900 that has a bad LC channel and you want to print with Pro ink, you would use the K4 Cool curves that do not require the Green c…

best
Walker