Swap inks LM <-> GR

[Anthony]

Hi Walker,
I’d like to swap the Warm Medium to the Cool Very Light on an old plotter.
Is it enough to swap the quad numbers between LM and GR on the 3 curves or do I have to do something else too?
Best,
Anthony

[walkerblackwell]

Check this video:

How to Re-Map a Piezography Curve

Here’s a quick article on remapping a Piezography curve. Remapping is used when one or more channels on a printer have died. Because Piezography does not normally require every available channel on your printer you can place a Piezo ink in a normally un-used channel and then remap the curves to use that channel instead of the bad channel. For example. If you have a 7900 that has a bad LC channel and you want to print with Pro ink, you would use the K4 Cool curves that do not require the Green c…

best,
Walker